Item Description |
ESDV & Choke Valve Assembly 4 1/16” 10K |
Choke Valve |
|
Valve Size: |
4 1/16” |
Valve Pressure Rating: |
API 10000 |
Valve End Connections: |
4 1/16” API 10000 RTJ Inlet x 4 1/16’” API 10000 RTJ Outlet |
Material Class: |
NACE Compliant |
Type |
Angled |
Flow Path |
Largest standard arrangement available, i.e; minimum delta P |
Operation |
Manual only |
Seat |
Class V shut off |
Choke valve must be fire safe |
|
Choke valve must be bi-directional |
|
ESDV |
|
Valve Size: |
4 1/16” |
Valve Type |
Gate |
Valve Pressure Rating: |
API 10000 |
Valve End Connections: |
4 1/16” API 10000 RTJ Inlet x 4 1/16” API 10000 RTJ Outlet |
Actuator |
Built-in control system, including a built in manual hydraulic pump with Hydraulic reservoir |
Modes of Operation |
1, To close, Signal from Pressure sensing spool, either HH or LL |
|
2, To close, fusible plug, which is part of the control system built into the actuator |
|
3, To close, solenoid operation, which latches when closed |
|
4, To close, manual operation on the actuator control system |
|
5, To open, manual reset only, by repressuring the hydraulic system manually |
Pressure Sensing Spool |
|
Inlet Connection |
4 1/16” API 10000 RTJ |
Outlet Connection |
4” 600# Raised Face |
Isolation Requirement |
The pressure sensing spool is to be provided with a means to isolate the sensing line |
Pressure Switch (Pilot Valve) |
HH set at 1000 psi and LL set at 25 psi |
General Notes |
|
Temperature Classification P, U Material Class DD, Performance Requirement Level 2. Production Specification Level 2 |
|
System shall be painted with one coat of Red Industrial Enamel |
|
System shall be filled with Univis N-22 hydraulic fluid |
|
All wetted parts must be suitable for operation in sour service |
|
All items must be NACE compliant |
|
All materials of construction are to be suitable for Crude Oil and Natural Gas. In future there will be a water cut of up to 90% plus. |
|
Each unit shall be assembled, and factory tested, delivered as a complete unit. |
|
RTJ gaskets are to be oval stainless-steel type |
|
Hydraulic lines are to be 316 S/S tubing |
|
All Items must be fire safe |
|
All Packing cases to be marked with “For Peshkabir and 4G Project” in 80mm high text |
|
Each unit is to be provided with Mechanical Lock Open Device for the actuator. |
Any enquiry please contact us by email: Quote@VigorPetro.com or Kevin.Dai@VigorPetro.com. Visit our website: www.vigorwellheadvalve.com or www.VigorPetro.com for more products information. WhatsApp/Wechat:+86 18280277398
123
Office Address: No. 180 Shulong Road, Xindu District, Chengdu City, Sichuan Province, China
Factory Address: Jianhu County, Yancheng City, Jiangsu Province, China
Tel: 0086-18280277398
Emial:Quote@VigorPetro.com
Web: www.VigorPetro.com